If your headphone is only working on one side, it is commonly due to shorted or torn wires andmalfunctioning audio jacks. Sometimes, you may even need to bend the headphone cables in a certain way to get sound on both sides, but this is just a makeshift arrangement.
The problem can occur due to misconfigured settings like different volumes on each side of the headphone. Nonetheless, this issue is relatively easy to fix if the software side of things is causing the issue. Otherwise, hardware issues are pretty difficult to fix and may even require a new replacement.
In this article, we will show the ways to fix your headphone only working on one side.
How to Fix Headphones Only Working on One Side?
There are several ways you may check and fix what is causing your headphones to malfunction. The most basic method would be to plug your headphones into another device to see if it works properly.
If your headphone works fine on other devices, it is likely a problem with your device. On the other hand, if your headphone malfunctions on every other device, it is likely a problem with the headphones.
We will show you how you may fix the issue if your headphones are malfunctioning, or if your device is misconfigured.
One of the primary causes of your headphone malfunctioning is dust and debris hindering the headphone’s connection. A simple cleaning of your headphone jack can fix this issue. you may use tissues or cloth to clean your headphone jack.
Furthermore, you may also try cleaning the audio ports to see if it helps. However, be careful not to push dust or debris further down the audio port. You can either use a dedicated cleaning toolkit or visit a service center to clean your device ports.
Reset Bluetooth Headphone
If you use Bluetooth headphones, resetting the device may do the trick of fixing this issue. A reset will clear everything in its stored memory and restore the default configuration.
This helps remove any issue that may have cropped up over its period of use.
Follow the steps below to reset your Bluetooth headphone:
Realign Stuck Bluetooth Pin
Another reason for headphones only working on one side could be from stuck Bluetooth pins. However, this issue only occurs in wireless and wired convertible Bluetooth headphones.
