Your Surface won’t charge if the device does not recognize the charger or when it does not get enough power. Problems with the power cord or the charger connection are the usual culprits of this issue. However, it can also occur if something is wrong with your battery driver.
If you have a Surface Book with multiple batteries, they can charge at different rates if one of the batteries has less than 20% charge. The device will only charge this battery until it exceeds this limit. Apart from these, if you enabled Smart Charging on your device, it will limit the maximum battery level to 80% to preserve the battery lifespan and stops charging further.
Check the Power Indicator
First, you need to check the LED indicator on the charger’s connector to determine the exact nature of the issue.
Depending on the LED status, move on to the respective solutions below.
Force Restart Surface
If the charging LED glows and the battery icon displays “Plugged in, not charging,” some temporary issues might be responsible. Force restarting the device should take care of such issues.
To do so, press and hold the power button until you see the Surface or Windows logo on the screen, and then release it. Try force restarting the device a couple of times if one restart doesn’t help.
Check Cable and Connector
You need the proper charger to provide enough power to the Surface device or the battery. This is why we always recommend using the charger that comes with the device. If you may’t use that charger, check thepower requirements on the official websiteto know what power rating the charger should have.
If you are using a proper charger, remove the power cable and all the peripheral devices for 20 seconds. And then plug back the power cord and see if your Surface starts charging. you may also try plugging the charger the other way around.
If the charger LED does not glow even then, the charger is likely damaged and you need to replace it. But if it glows but you still can’t charge the device, try performing the other solutions in this article.
Check the Power Source
You should also perform the following checks to ensure there is nothing wrong with your power source.
Clean the Connector and Port
