So you built your own PC? Or maybe you were just stripping it down for some hardware checkups. Regardless, there is always a chance for your graphics card to get stuck in the PCI slot. And well, that sure is a rather unfortunate scenario.
However, GPUs getting stuck in the motherboard is not a very sparse situation as well. So, you may probably free it with a bit of effort and of course, subtlety.
Whether it’s because of the lock for your PCI expansion card or due to an unsuitable position of your graphics card itself, we are here to help you conquer this issue you’re facing. And, this guide is made just for that!
So, if your GPU is stuck in the motherboard and you don’t know what steps to take, this guide will guide you through all the basics to help you successfully recover your card. Let’s get straight to the point.
How to remove a GPU stuck in the motherboard?
GPUs get stuck in the motherboard usually due to a jammed lock on the PCI slot. So, that’s where most of the work should be done. Listed below is a step-by-step guide on how you may remove your GPU stuck on the motherboard the right way.
Before getting into the nitty-gritty bit of the process, it’s important to ensure that all your cables are unplugged from the system. Even if youbuilt the PCyourself or just bought a new one, it’s important to ensure that every cable is out of your GPU’s way. So,
Determine the hardware characteristic of your GPU
Some motherboards have a lock, tab, or type of a clip on the PCI slot that locks the card in its place and you usually need to push it while trying to remove the card. And some might have one that requires a pull instead of a push.
These characteristics are seen mostly on modern generation GPUs. That is, older generation ones may not have any locks at all. Nevertheless, these small clips are at times likely to get jammed on your motherboard. So,
Now that you know thetype of your graphics card, your next move is to pull the GPU out. Keep in mind that you might have to use a bit more force than usual, but it is bound to come off. So,
So, a slight wiggle, a firm push back to the PCI slot, and a solid pull is the only way for you to take your GPU out. Sure, it’s difficult to put the exact force necessary to pull the graphics card, but doing it the right way shall see no damage done to your card.
From helping you choose the best graphics card for a particular budget, to the proper method on how to clean it, we have prepared tons of GPU-related guides that you might be interested in. So, check it out!
How Can I Prevent Components From Getting Stuck on the Motherboard?
Whether it’s due to wear and tear, or due to bad hardware positioning, your components are likely to get stuck on the motherboard again.
